CÔNG TY TNHH THIẾT BỊ KHOA HỌC KỸ THUẬT SÔNG HỒNG

CÔNG TY TNHH THIẾT BỊ KHOA HỌC KỸ THUẬT SÔNG HỒNG

Sản phẩm theo hãng

CỘT LỌC Maximizer™24 ReUse

  • Giá bán: Liên hệ
Model: N/A
Hãng sản xuất: Mỹ
Tình Trạng:Còn hàng

Cột lọc Maximizer ReUse 24 hoặc 41, có thể lọc 300 đến hơn 500l/ giờ và cho các mẻ đến hàng 1000l.

  • Chi tiết sản phẩm

Maximizer™24 ReUse

 

ReUsable Hollow Fiber Cartridges

 

High Flux — Consistent Results

 

 

The Maximizer™24 ReUseis a production scale hollow fiber cartridge designed for biopharmaceutical concentration/diafiltration and clarification unit operations. With a surface area of 5.42 m2, the Maximizer™24 ReUse HF cartridge can accommodatebatch volumes between 100L and 500L in a single cartridge system, and several thousand liters with a multi cartridge set up. The Maximizer™24 ReUse HF cartridge has a permeate flow rate for ultrafiltration processes of up to 325 L/hr.

The Maximizer™ ReUse cartridges are ideal for concentration and diafiltration of peptides, enzymes, monoclonal antibodies and other proteins and vaccines as well as cell harvest and cell clarification.

The Maximizer™24 ReUse cartridges utilize WaterSep’s well accepted antifouling, low binding, modified polyethersulfone (m-PES), membrane and are offered in molecular weight cut-offs (MWCO) that range from 3K to 750K and in pore sizes from 0.1 µm, 0.2 µm, and 0.45 µm, with Lumen ID’s of 0.5 mm, 1.0 mm and 2.0 mm. The antifouling properties of the m-PES membranes typically provide superior process flux and higher product recovery than do most other crossflow devices.

The Maximizer™24 ReUse cartridges are offered with the same path length as other high performance WaterSep hollow fiber cartridges, which makes scale down easy and predictable.

The Maximizer™ ReUse cartridges can be sanitized and cleaned in 0.5-1.0 N NaOH, and stored in 0.1 N NaOH between uses.

For those applications where cleaning and reuse is acceptable, the Maximizer™24 ReUse cartridges offer:

  • Self-containment – no assembly – ease of use.
  • Very cost effective in large scale format (hollow fiber products that are 4x-6x less expensive than most cassettes and do not require any expensive hardware for installation).
  • Gentle processing of cells, biomolecules and viruses.
  • Low hold-up volume.
  • High process flux, due to antifouling low binding m-PES membrane chemistry.
  • Robust, strong, multi-use hollow fiber membranes.
  • High yields and easy cleaning.
  • 100% integrity tested and ready to use cassettes.
  • Very tight specifications and high lot-to-lot membrane consistency.
  • Easy and reliable scale down.

TYPICAL APPLICATIONS

Clarification of cell cultures and fermentationsuspensions in primary recovery applications.

Cell-harvest. Excellent results have been achievedwith both E. Coli whole cells and E. Coli lysates, as well as other microbial process streams.

Concentration and purification of vaccines.

Concentration and diafiltration of gene therapy products.

Concentration/diafiltration of monoclonal antibodies,recombinant proteins, biological macromolecules and peptides.

ORDERING INFORMATION

Place orders online at www.watersep.net, or email purchase orders to orders@watersep.net, sales order confirmation to follow.

Maximizer24 ReUse HF Cartridge

0.5 mm Fiber ID

BA XXX 05MAX24 SH, 1/pkg

1 mm Fiber ID

BA XXX 10MAX24 SH, 1/pkg

2 mm Fiber ID

BA XXX 20MAX24 SH, 1/pkg

*Available in 10K, 50K, 300K-750K and 0.1 µm - 0.45 µm

Replace XXX with:

050 for 50K

750 for 750K

003 for 3K

005 for 5K

100 for 100K

910 for 0.1 µm

010 for 10K

300 for 300K

920 for 0.2 µm

030 for 30K

500 for 500K

945 for 0.45 µm

 

 

 

 

SPECIFICATIONS

Cartridge Dimensions

28.8” (73.15 cm) x 4.62” (11.73 cm)

Membrane Surface Area

58.4 ft2 (5.42 m2)

Molecular Weight Cut-off

3K, 5K, 10K, 30K, 50K, 100K, 300K, 500K, 750K

Membrane Pore Size

0.1 µm, 0.2 µm and 0.45 µm

Fiber ID

0.5mm, 1.0mm, 2.0mm

 

MATERIALS OF CONSTRUCTION

The cartridge as assembled is USP Class VI compliant.

Membrane

Modified  Polyethersulfone (m-PES)

Housing

White Polysulfone

Encapsulant

Medical Grade Epoxy

CONNECTIONS

Feed/Retentate

2.0” TC

Permeate

1.5” TC

 

Maximizer™41 ReUse

ReUsable Hollow Fiber Cartridges

High Flux — Consistent Results

 

 

 

 

 

 

 

The Maximizer™41 ReUseis a production scale hollow fiber cartridge designed for biopharmaceutical concentration/diafiltration and clarification unit operations. With a surface area of 9.74 m2, the Maximizer™41 ReUse HF cartridge can accommodatebatch volumes between 250L and 1,000L in a single cartridge system, and several thousand liters with a multi cartridge set up. The Maximizer™41 ReUse has a permeate flow rate for ultrafiltration processes of up to 584 L/hr.

The Maximizer™ ReUse cartridges are ideal for concentration and diafiltration of peptides, enzymes, monoclonal antibodies and other proteins and vaccines as well as cell harvest and cell clarification.

The Maximizer™41 ReUse cartridges utilize WaterSep’s well accepted antifouling, low binding, modified polyethersulfone (m-PES), membrane and are offered in molecular weight cut-offs (MWCO) that range from 3K to 750K and in pore sizes from 0.1 µm, 0.2 µm, and 0.45 µm, with Lumen ID’s of 0.5 mm, 1.0 mm and 2.0 mm. The antifouling properties of the m-PES membranes typically provide superior process flux and higher product recovery than do most other crossflow devices.

The Maximizer™41 ReUse cartridges are offered with the same path length as other high performance WaterSep hollow fiber cartridges, which makes scale down easy and predictable.

The Maximizer™ ReUse cartridges can be sanitized and cleaned in 0.5-1.0 N NaOH, and stored in 0.1 N NaOH between uses.

For those applications where cleaning and reuse is acceptable, the Maximizer™41 ReUse cartridges offer:

  • Self-containment – no assembly – ease of use.
  • Very cost effective in large scale format (hollow fiber products that are 4x-6x less expensive than most cassettes and do not require any expensive hardware for installation).
  • Gentle processing of cells, biomolecules and viruses.
  • Low hold-up volume.
  • High process flux, due to antifouling low binding m-PES membrane chemistry.
  • Robust, strong, multi-use hollow fiber membranes.
  • High yields and easy cleaning.
  • 100% integrity tested and ready to use cassettes.
  • Very tight specifications and high lot-to-lot membrane consistency.
  • Easy and reliable scale down.

TYPICAL APPLICATIONS

Clarification of cell cultures and fermentationsuspensions in primary recovery applications.

Cell-harvest. Excellent results have been achievedwith both E. Coli whole cells and E. Coli lysates, as well as other microbial process streams.

Concentration and purification of vaccines.

Concentration and diafiltration of gene therapy products.

Concentration/diafiltration of monoclonal antibodies,recombinant proteins, biological macromolecules and peptides.

ORDERING INFORMATION

Place orders online at www.watersep.net, or email purchase orders to orders@watersep.net, sales order confirmation to follow.

Maximizer41 ReUse HF Cartridge

0.5 mm Fiber ID

BA XXX 05MAX41 SH, 1/pkg

1 mm Fiber ID

BA XXX 10MAX41 SH, 1/pkg

2 mm Fiber ID

BA XXX 20MAX41 SH, 1/pkg

*Available in 10K, 50K, 300K-750K and 0.1 µm - 0.45 µm

Replace XXX with:

050 for 50K

750 for 750K

003 for 3K

005 for 5K

100 for 100K

910 for 0.1 µm

010 for 10K

300 for 300K

920 for 0.2 µm

030 for 30K

500 for 500K

945 for 0.45 µm

SPECIFICATIONS

Cartridge Dimensions

46.5” (118.11 cm) x 4.62” (11.73 cm)

Membrane Surface Area

104.9 ft2 (9.74 m2)

Molecular Weight Cut-off

3K, 5K, 10K, 30K, 50K, 100K, 300K, 500K, 750K

Membrane Pore Size

0.1 µm, 0.2 µm and 0.45 µm

Fiber ID

0.5mm, 1.0mm, 2.0mm

MATERIALS OF CONSTRUCTION

The cartridge as assembled is USP Class VI compliant.

Membrane

Modified  Polyethersulfone (m-PES)

Housing

White Polysulfone

Encapsulant

Medical Grade Epoxy

CONNECTIONS

Feed/Retentate

2.0” TC

Permeate

1.5” TC

 

Sản phẩm liên quan

TOP